1 The main body of the egg tray manufacturing machine is stable and firm
Extremely high precision of the production parts of the egg tray manufacturing machine is required, and the error cannot exceed 0.1mm. If the egg tray manufacturing machine manufacturer cuts corners in the production of egg tray manufacturing machine, the error exceeds the specified range, resulting in unstable structure and body of the final assembled egg tray manufacturing machine. Such egg tray manufacturing machine will be used in the future. It is very likely that unexpected failures will occur in the production environment of the company, causing unnecessary trouble.
AGICO uses laser cutting to minimize the error of spare parts. The egg tray and spare parts produced in this way can be called qualified. Because of the small error, the structural stability of the egg tray manufacturing machine after assembly is very good.
2 The material of the egg tray manufacturing machine body is significant
The egg tray manufacturing machine cannot avoid rub with water during production, and the surface of many egg tray manufacturing machines with poor materials will rust over time, it will even affect the production of egg trays.
In order to avoid this situation, the whole body of AGICO’s egg tray manufacturing machine with excellent quality will be made of stainless steel plate. This kind of steel plate reduces the probability of the equipment being corroded. Even if it is used for a long time, the surface of the body will be intact.
3 The sealing structure of the machine must be firm and complete, without a single crack
Once many egg tray manufacturing machines are put into production, they will operate continuously for 24 hours for a long time. At the same time, the egg tray manufacturing machine will also be in contact with the water source for a long time. At this time, it is necessary to test whether the sealing structure of the body is tight and complete. Low-quality egg tray manufacturing machines are generally not completely sealed, and there will be slight cracks. Clear water is likely to leak into the body seal through the cracks, resulting in failure of the egg tray manufacturing machine.
4 The operation interface of the egg tray manufacturing machine should be easy to use
In recent years, the egg tray manufacturing machine has entered the era of full automation. There is no need for excessive human intervention. The operator only needs to operate the egg tray manufacturing machine. An overly complex operation interface will increase the operator’s learning cost, and the redundant functions are not conducive to use.
5 Good after-sales service
During production with an egg tray manufacturing machine, problems and accidents are inevitable. If the egg tray manufacturing machine manufacturer has no after-sales service at all, and gives customers a one-time transaction, and the customer’s egg tray manufacturing machine problems are completely ignored, it will bring unnecessary trouble to the customer’s production and life. A good after-sales service can greatly improve the customer experience and save a lot of trouble.
What are the reasons for the failure of egg tray manufacturing machine?
The complete set of equipment that makes the pulp to form the egg tray is collectively called the egg tray manufacturing machine. It includes the main engine such as headbox, wire section, press section, drying section, calender, reel and transmission section, and auxiliary systems such as steam, water, vacuum, lubrication, and heat recovery. But in the process of use, failures of egg tray manufacturing machine may occur.
1.Wear and tear
▪ Parts and equipment that rub with copper mesh, felt or pulp and forming paper for a long time, such as pulp pump, pulper, desander, vacuum box panel, press roll, calender roll, etc.;
▪ Parts that move relatively frequently between parts, such as scrapers, steam inlet heads, cylinders, vacuum couch rolls, vacuum pumps, etc.
2 Lubrication
The mechanical rotation relays on bearings. The egg tray manufacturing machine production line mainly consists of rotating rollers. There are many types and quantities of rollers. There are hundreds of bearings of various types. Therefore, lubrication management is also particularly important. Under the influence of water, high temperature and heavy load, the lubricating oil is easy to lose, evaporate and age, which will destroy the lubricating effect, cause bearing damage and shaft head wear. Therefore, regular inspection and refueling is essential. This also requires special attention.
3 Fatigue
Overload and continuous-running machinery are prone to fatigue damage. On the egg tray manufacturing machine, Restricted by the mechanical structure and operating principle, design strength of parts of egg tray manufacturing machine such as: net vibration spring plate, electromagnetic clutch suction cup, coupling anti-overload pin, etc., should not be too strong to prevent the occurrence of damage. It can be solved by taking measures such as maintenance and technical transformation.